Bosh sahifa > Bilim > Kontent

Production Design Essentials for Linear Shaft

Mar 22, 2022

Linear Shaft has the guiding effect of sliding bearing, which can realize linear motion with sliding bearing. These product design conditions for linear motion systems are: simple design, better execution capabilities, low maintenance costs, etc. In addition, due to the high{{0}}intensity friction in a large number of reciprocating movements, Linear Shaft needs to use strictly selected sturdy and durable materials, after high-frequency heat treatment, it must have an accurate outer diameter size, and meet the relevant regulations for roundness, straightness and surface. Processing, etc. Since Linear Shaft and linear plain bearings are in point-to-point contact, the surface hardness is required to be very high, and the raw materials produced and the heat treatment method are very important. Material: SUJ2 (equivalent) GB Gcr15. Hardness: HRC6{{10}}2; Hardened layer depth: 0.01-0.015mm; Surface roughness: Ra0.10m-Ra0.35m; Straightness: below 70m/1000mm; shaft outer diameter tolerance g6.

www.rodandtubechina.com

So'rov yuborish
Biz bilan bog'lanish